Product Description
Details
Front Runner 1250mm Load Bars / Toyota Prado 150 Kit
A pair of feet mount load bars used when there is not a need for a full rack. These allow for a low profile and a smaller footprint.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner Load Bars.
Ideal for mounting a roof tent or other accessories where a low profile and smaller footprint is preferred.
Utilize the same 22mm thick HD aluminium extrusions (slats) as the Slimline Roof Rack.
The sliding nut t-slots allow quick fit and removal of accessories and equipment.
The t-slots are located on both the upper and lower faces of the load bars and are used for the mounting the feet as well as accessories.
KRTP010 - Front Runner 1250mm Load Bars / Toyota Prado 150 Kit
Consisting of:
2 x FASS002 - Foot 50mm (Pair)
1 x LBSK003 - Roof Load Bar pair 1250mm
1 x TRTP003 - Prado 150 Track 1600mm (Pair)
Single Load Bar Dimensions:
Width 90mm (4")
Length 1250mm (49")
Height 20mm (1")
Approximate Installed Weight 8kg (19lbs)
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the foot listed above. If your kit uses Legs, adding the height of the Slimline II Tray to the height of the Legs will determine the height of the rack from your vehicle’s rain gutters.
If your kit uses Foot Rails, adding the height of the Slimline II Tray to the height of the Foot Rails will determine the height of the rack from the crown (highest point) of the vehicles roof.
Additional Information
Additional Information
export | no |
---|---|
Collection Only | N/A |
Manufacturer | Front Runner |
Vehicle Make | Toyota |
Vehicle Model | Land Cruiser 150 Prado |