Product Description
Details
SuperPro Control Arm Kit
Supplied with Camber & Caster Adjustable Ball Joints. Fitted with SuperPro Bushings
Getting the correct alignment is no longer a problem and the design of these Arms overcome clearance issues.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.
Previously made from steel tube welded to a forged steel ball joint plate, the new arms utilise the manufacturing method developed and refined with the Ford and Toyota arms.
They are built tough in Australia using high strength, OE grade Aussie steel.
Key Features
- Increased articulation, perfect for the off road environment
- Provides for camber and caster adjustment using an adjustable ball joint
- Increased clearance between spring and Control Arm at full articulation
- SuperPro Bushings
- Made in Australia
Suits
- NAVARA D40 - 2005-2014
NAVARA NP300 4WD Dual Cab - 2015-on
NAVARA NP300 4WD Single & King Cab - 2015-on
PATHFINDER R51 - 2005-2013
Additional Information
Additional Information
export | No |
---|---|
Manufacturer | Superpro |
Collection Only | N/A |
Vehicle Make | No |
Vehicle Model | Navara |
Suspension Lift | N/A |
Suspension Load | N/A |
Location | N/A |
Drive Side | N/A |