Delivery image
Telephone +44 (0) 1769 550900Email info@devon4x4.com

Front Runner Slimline II Full Rack - Ford Ranger & Mazda BT50 2012 To 2016

SKU: KRFM005T

Be the first to review this product

Ford & Mazda 2012 to 2016 Double Cab
Excl. Tax: £815.00 Incl. Tax: £978.00

Devon 4x4

Specialist 4x4 vehicle company

4x4 Accessories & 4x4 Spares

Compare Products

You have no items to compare.

Product Description

Details

Ford & Mazda 2012+

This Slimline II rack kit contains the Slimline II tray (1255mm x 1358mm), (2) Tracks, (4) Feet that fit into the Tracks and a Wind Deflector.​​​​

THE SLIMLINE II IS STRONG.

Unlike most roof racks, the Slimline II was designed and built specifically for off-road use. Manufactured with high density aluminum, the Front Runner Slimline II can withstand the stress of any adventure.

The load support slats fit into a double walled aluminum extrusion channel on the side profiles and are secured via locking nuts. This patented design creates a joint support that is stronger than usual for a roof rack.

The Slimline II’s L-shaped rear and front slat design increases the strength of the entire rack, making the Slimline II the lightest and the strongest roof rack available.

(*the rack must always be loaded in accordance with the vehicle’s load rating specifications).

THE SLIMLINE II IS LIGHTWEIGHT. 


Aluminum is on average 30% lighter than steel. The new Front Runner all aluminum Slimline II patented design offers the best strength to weight ratio of any roof rack. The all aluminum Front Runner Slimline II can withstand greater stresses than the best all-steel roof rack at 1/3rd less the weight.

The extra strength and lightness of the Slimline II allows heavier loads to be carried on the roof of the vehicle more safely compared to comparable all-steel roof racks. Using the lighter Slimline II Roof Rack instead of a comparable all-steel rack can lessen your vehicle’s environmental impact, decrease vehicle wear, and improve gas mileage.

THE SLIMLINE II IS MODULAR.


The Slimline II offers complete roof rack design flexibility. No other roof rack available today can be assembled by the customer to meet their specific needs.

More slats can be added to create a solid platform option for sleeping and/or sitting and enjoying sundowners. Slats can also be removed to create unobstructed access through a T-top or sunroof.

A full size rack can be quickly converted to a shorter rack with the purchase of a pair of shorter side rails. Or a smaller rack can be made longer with the purchase of longer side rails and additional slats.

Expedition style rails can even be effortlessly added to create the classic roof rack basket shape.

If any individual component of the roof rack becomes accidentally damaged, the part can be swapped out without having to replace the entire tray.

THE SLIMLINE II IS LOW PROFILE.

Because of the unique T-slot mounting system, “basket style” side rails are not necessary. This flat deck design is unobtrusive and compliments the lines of today’s automobiles. Because there are no side rails, it’s easier and quicker to remove stored gear and it’s also possible to mount a roof top tent.

For city use, the lower profile affords easier access to underground car parks and garages. By minimizing the profile, there is less drag and noise than the typical roof rack - thereby increasing fuel efficiency and increasing performance.

To further reduce wind noise, all Front Runner Slimline II roof racks come with Wind Deflectors included.

THE SLIMLINE II IS DURABLE.


A roof rack should last as long as your vehicle. Most roof racks available today will rust, chip, and/or crack after being exposed to the elements. The Front Runner Slimline II Roof Rack will take the abuse of the sun, the rain, the gear, as well as whatever condition road you drive on.

The Slimline II tray is manufactured in South Africa entirely with corrosion free aluminum while the mounting solutions are either all aluminum or stainless steel -- ensuring a lifetime of dependability.

As an extra layer of protection, all Front Runner Slimline II roof racks and mounting solutions are powder coated satin black with one of the industry’s most durable and lasting finishes - Akzonobel’s Interpon 600 (CPO 6034). This weather resistant powder coating is formulated for exterior uses and far exceeds industry standards, with the finish showing no visible damage at 500 hours of continuous salt spray.

THE SLIMLINE II IS VERSATILE.



The Slimline II offers easy on and off mounting for any type of adventure gear. No more untying, unstrapping, un-netting the entire contents of your roof rack to remove one item. The t-slot slats and slotted side rails offer complete mounting flexibility. Loads are independently secured anywhere on the top, sides, or bottom of the rack using Front Runner’s unique bolt on system.

The Slimline II offers limitless possibilities for the end user to customize the arrangement of over 25 Front Runner roof rack accessories.

Front Runner offers roof top solutions for securing water, fuel, tents, bikes, braai/BBQ grates, skis, fishing rods, surfboards, axes, recovery jacks, spades/shovel, bottle openers, clothes, canoes/kayaks, lights, tables, gas/propane bottles, rescue tracks, spare tyres/tires, suitcases, chairs, potjie pots/cast iron pots and snowboards.

And if you can’t find a Front Runner accessory for your particular brand of adventure -- secure whatever you like via bolts and the t-slots or try the Front Runner Tie Down Rings with the Front Runner Stratchit. The possibilities are endless.​

KRFM005T - Front Runner Slimline II Full Rack / Ford & Mazda 2012+

Consisting of:
1 x FASS002 - Foot 50mm (Pair)
1 x FASS004 - Foot 65mm HX (Pair)
1 x FITT002 - Fitting Instruction - Kit Vehicle Specific
2 x RRAC021 - Between slat foot adapter (Pair)
1 x RRSTD07 - Slimline II Tray - 1255mm(W) x 1358mm(L)
1 x TRFR001 - Ford Ranger Tracks 2012+ 1200 mm (Pair L/R)
 
Slimline II Tray Outside Dimensions:
Width 1255mm (49")
Length 1358mm (53")
Height 50mm (2")

Approximate Installed Weight 21kg (45lbs)
 
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the foot listed above. If your kit uses Legs, adding the height of the Slimline II Tray to the height of the Legs will determine the height of the rack from your vehicle’s rain gutters.

If your kit uses Foot Rails, adding the height of the Slimline II Tray to the height of the Foot Rails will determine the height of the rack from the crown (highest point) of the vehicles roof.

Additional Information

Additional Information

export no
Collection Only N/A
Manufacturer Front Runner
Vehicle Make Mazda
Vehicle Model BT-50

Reviews

Write Your Own Review

You're reviewing: Front Runner Slimline II Full Rack - Ford Ranger & Mazda BT50 2012 To 2016

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Value
Quality