ARB Sahara Bumper Toyota Land Cruiser 200 2016 On

Sahara Bar (VX and Sahara)

With a more low profile design, the Sahara bar provides an alternative look to the range of Deluxe bull bars, whilst retaining many of the strength and protection features.

Offering significantly greater protection than the factory bumper, the Sahara bar is available with or without the polished centre tube, can accommodate a selection of Warn, Tabor and Bushranger low mount winches.

Optional fog lights can also be specified.

Please Note: Image of GX/GXL Sahara bar for illustrative purposes only.

Features

• Vehicle specific design to complement the 200 Series VX and Sahara
• Durable steel construction for maximum protection
• Bi-LED headlamps with dynamic auto levelling
• Provision for front parking sensors
• Provision for OE LED fog lights. ARB fog light covers included as standard
• LED fog lamps
• Radar Cruise Control (Sahara model only)
• Incorporates ARB’s renowned multi fold upswept and tapered wing design for optimum strength and approach angle
• Split pan design for maximum strength and airflow
• Two piece grill design for split pan
• Extensive protection panels on centre and either side
• Superbly engineered, air bag compatible mounting system secures to chassis via high tensile bolts
• Will accommodate Warn, Magnum, Bushranger and Smittybilt low mount model electric winches up to 12,000lb
• 4 Camera Multi Terrain Monitor (Sahara model only)
• Pressed form top pan and aluminium (powder coated black) winch cover panel
• Twin Hi-Lift jacking points located beneath each buffer for optimum strength
• Provision to accommodate ARB Intensity LED, and a range of IPF and Bushranger driving lights
• Provision for optional ARB Fog Light kit
• Includes ARB’s LED, indicator and clearance light
• Press form in wing to clear OE headlight washers
• Durable two piece buffers
• Two aerial brackets are located on top of the centre frame. Mount holes are provided on the top pan for when no tube kit is fitted
• Zinc rich primer for additional corrosion resistance
• Finished in a hard-wearing powder coat with the added option of colour coding to individual vehicles

DESIGN & DEVELOPMENT:
The VX and Sahara models of the MY16 Toyota 200 Series Landcruiser have a number of features not found on the GX and GXL models that required a separate development program. This has resulted in a Sahara bar specifically designed and developed for the flagships models within the 200 Series range.
The ARB Summit bar design and development program for the VX and Sahara models includes elements that complement the following vehicle features not found on lower specification 200 Series:

• Bi-LED Headlamps with dynamic auto levelling
• Front parking sensors
• LED fog lamps
• Radar Cruise Control (Sahara only)
• 4 Camera Multi Terrain Monitor (Sahara only)

PROTECTION & STYLING CHARACTERISTICS:

• Vehicle specific design for the 200 Series VX and Sahara.
• Registered design of styling and design components.
• Durable steel construction for maximum protection.
• Incorporates ARB’s renowned multi fold upswept and tapered wing design for optimum strength andapproach angle.
• 30mm radius on wings and centre section.
• Engineered, air bag compatible mounting system secures to the chassis via high tensile bolts.
• Split pan design for maximum strength and airflow.
• 2 piece grill design for split pan.
• Extensive protection panels on centre and either side.
• Pressed form top pan and aluminium (powder coated black) winch cover panel.
• Twin Hi-Lift jack points located beneath each buffer for optimum strength.
• Durable two piece buffers.
• Will accommodate Warn, Magnum, Bushranger Smittybilt low mount model electric winches up to12,000lb (not Warn M12,000).
• Provision to accommodate ARB Intensity LED’s and a range of Bushranger and IPF lights.
• Provision for original equipment LED fog lights. ARB Fog light covers PN 3500680 included asstandard.
• Includes ARB LED Indicator and Clearance light.
• Provision for front parking sensors.
• Press form in wing to clear original equipment headlight washers.
• Two aerial Mount holes provided on top pan for when no tube kit fitted.
• Bar adds approximately 210mm to the overall length of the vehicle.
• Approximate weight of the bar, chassis mounts and fitting kit is 76kg.
• Zinc rich primer for additional corrosion resistance.
• Finished in satin black powder coat

FOG LIGHTS:
ARB’s new fog light surround is featured in the ARB Summit Bar for the MY16 200 Series. An adaptor plate has been developed to retain the OE Toyota LED fog light in a modified ARB Fog light surround. OE fog light adjustment is retained in the fog light adaptor bracket. ARB’s clear fog light cover part # 3500680 is supplied standard with the VX and Sahara Summit Bar. The fog light surround will be supplied in a natural black finish to complement the buffer design.

WINCH MODEL FITMENT:
The ARB Sahara Winch bar for the VX and Sahara MY16 200 Series fits the following winches:

• Warn M8000, XD9000, 9.5XP, 9.5XDC, 12.0XE (Not M12000)
• Warn ZEON 8, 8-S, 10, 10-S and 12
• Warn ZEON Platinum 10, 10-S and 12
• Warn Tabor 8, 10 and 12
• Smittybilt Gen2 X20 10K
• Bushranger DV-9TH, DS-9.5TH, Seal 9.5TH and DV-12TH

Due to the orientation of the Warn M12000 (clutch handle on the right hand side) this winch is not recommended fitment to the Sahara Bar.
The Sahara bar has an integrated control box mount that recesses the control box lower in the pan. When mounted this way there is no effect on the vehicles radar system (if equipped). Different mount holes and control box brackets are provided to suit different winches. Winch fitting kit instructions have further information as to which mount hole or bracket is suitable.
Please note that not all winches on the market will have mount holes pre-drilled.

Additional fit kits are required depending on the winch being fitted:

• 3500720 WINCH INSTALL KIT SUMMIT BAR. This kit includes a flip upnumber plate bracket.
• Warn ZEON and ZEON Platinum fitment require Warn part No 89965Short Wiring Kit.
• Warn ZEON Platinum fitment may require Warn part No 94288 Enhanced Signal Kit.
• Winches fitted with a hawse fairlead will require part No 3500600 Hawse Fairlead Spacer Kit.

DRIVING LIGHT MOUNTS:
The press formed top pan includes laser cut holes for fitment of a range of compatible driving lights including ARB Intensity, Bushranger and IPF 800, 808 and 900 Series lights.
Pinning holes for ARB Intensity lights are included.
It is recommended that driving lights are fitted at the time of bar fitment. If driving lights are being fitted after the bar has been fitted, the centre lower stone tray will need to be removed to provide access to the right hand side driving light mount.

BUFFERS, SPLIT PAN GRILL AND FOG LIGHT SURROUND:
ARB’s Sahara Bar range features two piece buffers, split pan grill and ARB’s Fog Light Surround with an adaptor plate to accept fitment of the OE LED fog light. All three components are designed to integrate with each other and the bar design.
The upright section of the two piece buffer has a style line to complement the fog light surround.
To assist with valuable air flow to the radiator the split pan has a two piece grill for an integrated appearance.

RADAR CRUISE CONTROL:
The Sahara MY16 200 Series features a Radar Cruise Control system. The radar is located within the Toyota symbol in the vehicles grill.
Due to the recessed control box mount and spacing of the driving light mounts operation of the Radar Cruise Control is not affected. Effect of fitment of an LED light bar or different driving lights or winch control boxes is
not known.

HI-LIFT JACK POINTS:
Hi-Lift jack points are located directly below the buffers. The Hi-Lift jack point is welded directly to the upright on either side and is designed to prevent the Hi-Lift jack from interfering with the buffer.

HEADLIGHT WASHER PRESS FORM:
VX and Sahara models feature Bi-LED Headlamps with dynamic auto levelling. Headlight washers are also included due to the headlight design. The wings of the ARB Sahara bar for the VX and Sahara models include press forms to allow clearance for the original equipment headlights washers to operate in all conditions. Due to the dynamic nature of the vehicle’s chassis and movement between the chassis mounted bull bar and the vehicle body the press form allows the headlight washers to be used even when the bar and chassis are moving under rough road conditions.

PARKING SENSORS
Laser cut provision is provided in each wing for the Original Equipment front parking sensors. OE parking sensors have been mapped and their performance closely replicated when fitted to the ARB Sahara Bar for the VX and Sahara 200 Series. Parking sensors are located approximately 140mm higher than the OE condition. When fitted with larger diameter tyres and / or aftermarket suspension these parking sensor positions and hence range may also be affected.
Further real world testing has been conducted evaluating the operation of the sensors against such items as rubbish bins, parking bollards, wire fences, large rocks and step driveway entrances. Test results show that sensor performance is replicated as close as practical with the change in height of the sensors location.

Please check stock before ordering.

Note - chrome A bar not included and not available to order.