ARB Summit Rear Step Tow Bar - Isuzu D-Max 2012 On

Summit Rear Step Tow Bar

The all new Summit Rear Step Tow Bar combines class leading design, proven ARB engineering and a no compromise approach to protection and performance. Built around a tubular steel subframe that is finished in a textured black powder coat, the Summit rear bar includes an integrated tow hitch, provisions for an ARB air compressor and trailer camera wiring, 50 amp Anderson plug and trailer plug wiring.

With four easily accessible Hi-Lift jack points and a design to complement the Isuzu Dmax 2012 on, the Summit rear bar is ready for the most demanding off road use.

Features

• Available for vehicles without parking sensors
• Two piece beaver panel supplied in a satin black powder coat.
• 2.5mm press formed steel wing panels
• Side wing panels can be colour coded to suit vehicle (supplied in a black powder coat)
• 60.3mm x 2.6mm steel tube frame
• Anodised aluminium top tread plate
• Two tow chain fixture points.
• Moulded licence plate bezel and Narva LED licence plate light
• 3.5t class 4, 50mm tow hitch
• Flip down number plate bracket to allow access to the factory spare wheel mechanism
• Hi-Lift jack points
• Separate bolt on wings supplied in a satin black powder coat. Fitment requires 70mm access holes to be drilled throughthe lower section of the vehicle tub.
• Weighs approximately 64kg including wings, all fasteners and tow bar tongue.
• Zinc rich primer for additional corrosion resistance.

SUMMIT RSTB DMAX 12ON|3500KG NON SENSOR

DIFFUSER PANEL AND CENTRE LIFT UP PANEL:
The lower edge of the Summit RSTB is fitted with diffuser panels. A light grey powder coat finish is used on the diffuser panel for contrast with the wings and the textured black powder coat used on the 60.3mm tube.
The centre spring loaded lift up panel is a neat and practical solution to hide the trailer wiring connection and mount points for the optional ARB Trailer Camera kit (part #10600030), ARB Air compressor air-line fitting or 50amp Anderson plug when not in use.

ANODISED STEP EXTRUSION:
To complement ARB Summit Side Rails and Steps the same style silver anodised extruded aluminium section is used on the Summit RSTB. The extrusion provides ridges for additional grip.

LICENSE PLATE HOLDER:
A fold down license plate holder is supplied to allow access to the original equipment spare wheel mechanism. To alleviate issues with the licence plate folding down when the vehicle is moving a 10mm spanner is included to enable a pinning bolt to be removed from the licence plate bracket.

CLASS 4 TOW HITCH:
A 50mm hitch is supplied standard with the ARB Summit RSTB for the Colorado and Dmax. The tow hitch includes gussets to maintain the 3.5t rating of the Rear Step in line with the vehicles tow rating (subject to vehicle specifications).
Tow chain fixture points are located directly below the 50mm hitch receiver.
The location of the tow hitch pin has been positioned to allow fitment of the Bushranger Hitch (part # 58X22/A).

Not a stock item, please check the availability before ordering.