Delivery image
Telephone +44 (0) 1769 550900Email

Old Man Emu BP-51 Shock Absorber - Toyota Hilux Rear RH

SKU: BP5160001R

Be the first to review this product

Excl. Tax: £443.17 Incl. Tax: £531.80

Devon 4x4

Specialist 4x4 vehicle company

4x4 Accessories & 4x4 Spares

Compare Products

You have no items to compare.

Product Description


Designed to bolt onto your Hilux without any modifications, the revolutionary, patent pending technology of the BP-51 range of OME Suspension delivers unparalleled on and off-road performance for your Toyota.

The BP-51 (Bypass 51mm diameter bore) shock absorber's body, reservoir and components are all made from 6061 T6 aluminium, Type 3 40 micron hard anodised ensuring exeptional heat dissapation and corrosion and stone resistance.

This individual product is a BP-51 Shock for the rear right hand side of your Toyota Hilux.

A full suspension kit contains:

  • 1 x BP-51 Coil Over, Front Left Hand BP5190001L
  • 1 x BP-51 Coil Over, Front Right Hand BP5190001R
  • 1 x BP-51 Shock, Rear Left Hand, BP5160001L
  • 1 x BP-51 Shock, Rear Right Hand, BP5160001R (this product)
  • 1 x BP-51 Front Fitting Kit VM80010001
  • 1 x BP-51 Rear Fitting Kit VM80010002

Parts can be supplied both separately and as part of a kit. For more information, send an enquiry to our technical team.

***Please Note: Actual product may vary slightly from the image shown as BP-51 products are designed for vehicle specific application***

Some features of the BP-51 Range of suspension include:

  • Internal bypass, shim controlled, position sensitive damping (Patent Pending) which provides comfort at ride height, gives you increased control and damping at end zones

  • Kidney bypass ports/51mm bore diameter for greater oil volume and means that shocks are more tunable and have better ability to generate force
  • Vehicle specific applications mean that no fitting modifications are required
  • External compression and rebound adjustment is on car adjustable, allows independent adjustment of compression and rebound and suits varying loads and ride preferences as there is an ultra wide range available
  • Body, Reservoir and components are all made from 6061 T6 Aluminium for heat dissapation and corrosion resistance
  • Type 3 40 Micron hard anodised finish for abrasion and corrosion resistance
  • Dash 6 high temperature teflon hose with high flow settings meaning there is no restriction to oil flow
  • Large Teflon lined spherical bearings for durabilty (coil over applications only)
  • Adjustable spring preload and ride height means BP-51 suspension range can cater for varying loads (coil over applications only)
  • High pressure nitrogen reservior with aluminium, anodised floating piston means increased oil volume and maximum travel is achieved
  • Impact resistant, replacable shaft guard protects against stone damage
  • 19mm hard chromed ground shaft results in load friction and superior strength
  • Quality oversized rubber bushings for durability
  • 100% re-buildable and re-valveable for longevity and tunability
  • High temperature viton and teflon seal pack increases the durability of the seals
  • High performance, high viscosity index oil for durability and consistency of performance
  • 19000MPA polished, high strength, high fatigue shims for increased durability and strength

From OME Shocks to OME suspension kits, all of our products are backed by a minimum 3 years or 60,000km warranty (whichever one comes first)

Additional Information

Additional Information

export no
Manufacturer Old Man Emu
Collection Only No
Vehicle Make Toyota
Vehicle Model Hilux
Suspension Lift No
Suspension Load No
Location No
Drive Side No


Write Your Own Review

You're reviewing: Old Man Emu BP-51 Shock Absorber - Toyota Hilux Rear RH

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars