Brantz Retrotrip 3 Classique

Brantz Retrotrip 3 Classique

The Retrotrip3 is a simple evolution of the ever-popular Retrotrip2 and has all the same features of accurate one-in-a-thousand push digit calibration and clicking electromechanical readouts which has made the Retrotrip2 eligible for historic type rallies throughout the world. Where the Retrotrip3 differs is that it contains two completely separate and independent tripmeters in the same box. One tripmeter drives the normal two counters on the top row of the box. A switch allows one of these two
counters to be disconnected to hold a reading for 'whatever' purpose. A second tripmeter with its' own calibration switches drives a third readout on the lower row. Both tripmeters are fed from the same single sensor fitted to either the speedometer cable or road wheel. All counters can be zeroed independently. Either of the tripmeters can be prevented from counting by changing its’ calibration figure to 000.

Triple Display
• Total Distance
• Inter Distance
• Stop Watch Read Out/Average Speed

Independently Zeroed displays
Display Lenses for increased digit size
12 Volt Illumination
Easily Calibrated- With the lower one Independently Calibrated
Requires a Brantz Sensor Dimensions: 140 x 95 x 110 (170 x 95 x 110 inc Mounting holes)