Defender 07 On Single DIN Dashboard Mount

The MUD Puma Single DIN Dashboard Mount fits all Defender models from 2007 onwards fitted with the Ford 2.4/2.2 Tdci engine.
The MUD Puma Single DIN Dashboard Mount creates a quick and easy method of mounting a single DIN accessory into the Puma dashboard. You will however have to route any wiring through the back of the dashboard.
Supplied with all fixings required to provide a quick and easy installation.
Fits both right-hand drive and left-hand drive vehicles.
Ideal for mounting any DIN sized CB/HAM radio unit into your Defender. Mic extension leads are an inexpensive accessory and commonly available so that Mic can reach the driver. MUD does not supply Mic extension leads.
The Puma Single DIN dashboard mount is also suitable as a digital tachograph mount although EU customers should be aware that mounting a tachograph on the passenger side of the dashboard does not meet EEC legislation (Directive 3821/85 Annex 1b) as a suitable mounting location.
We would argue that a VOSA roadside check would be more interested in whether you have a fully working tachograph at all rather than where it is mounted in your vehicle!
Please note that MUD does not supply or fit CB radios or tachographs.
For all tachograph enquiries consult your local VOSA approved tachograph fitting centre.
The single DIN mount will also accomodate 7 of our Carling Contura II switches. Create a seven gang mount by choosing 5 x interlocking centres and 2 x interlocking ends. Then select the switches or blanks needed to complete the mount.
The single DIN mount also comes with a handy 'coin tray' which sits behind the grab handle.
Supplied with all fixings required to provide a quick and easy installation.
Fits both right-hand drive and left-hand drive vehicles.