ARB Recovery Point - Isuzu D-Max 2012 on

PRODUCT SPECIFICATION

DESIGN & DEVELOPMENT:
ARB’s recovery point for the D-Max 2012 on is designed to be fitted to the left or right hand side of the chassis or both.

Manufactured from 20mm flame cut steel plate, each recovery point is supplied as a single unit with the necessary
mounting hardware.

To ensure that during an angled recovery there are no inappropriate forces exerted on the shackle, the recovery point has
a long slot to allow the recommended bow shackle to be fed through and the strap attached via the pin instead of the
bow.

This allows even distribution of the recovery force through the shackle to avoid side loads on the pin. Side loads on the pin
invoke forces that tend to open up the shackle, putting unwanted load on its weakest point, the pin threads.

SAFETY:
Each ARB Recovery Point is supplied with an operator instruction card that identifies the correct method of attaching
both the shackle and recovery strap as well as important safety information. This card is designed to be kept in the glove
compartment of the vehicle.

Recovery points also have a warning label attached which clearly identifies the strap and shackle rating to be used with the
point and usage and safety information.
Maximum strap rating is an 8000kg strap.
Recommended shackle rating is 4.75t.

Fits on left hand side only.

Library image