basically take a vitara T / Box cut it and shorten the shaft then he makes all the nice shiny bits that you see at the front then remove the flange from the SJ T / Box which is already a rocklobster and remove the mounting bolts the SJ box the slides inside the tube so now there is no need for a intermediate prop and bolt all up all i got to do now is to fit the cradle which mounts the G / Box and the 2 T / Boxes together and has a spine which will fit all round the SJ T / Box which should stop the box from flexing and spitting all its gears out which is a common prob on Suzukis so basically the 3 boxes will be one unit.
this should hopefully give me a ratio of 7.5-1
you normally leave the Vitara box in high and the SJ Box in low but when needed just put the Viatara into Low and you get a stupidly low box
this is what happens when trying to hard
